F6 Parts Kit
After many years of being out of stock, we finally have the F6 transformer kits available.
There are two purchase options:
PCB and Transformer: Pair of mirrored F6 PCBs and 2 Jensen JT-123-FLPCH signal transformers ($119)
- Parts Kit: All of the above plus everything you need to stuff the PCB except the JFETs ($169)
Parts kit contents:
- Mirrored F6 PCBs (2)
- Jensen JT-123-FLPCH transformers (2)
- Q1/2 Matched IRFP240 MOSFETs (4)
- R1 .56R 3W (2)
- R2 .47R 3W (2)
- R3 100R 3W (2)
- R4 18R (2)
- R5 1k (2)
- R6 47k (2)
- R7/8/9/10 10k (8)
- R11/12 47R (4)
- R13 15k (2)
- C1/2 1000uf 25v (4)
- P1/2 5k (4)
- Z1/2 5.1v Zener (4) (Marked "31B")
- Z1a/2a 6.0V Zener (4) (Marked "33B")
- D1 LED (2)
About the amplifier
These F-6 Clone Boards use the same circuit as the Nelson Pass / diyAudio FirstWatt F6 described in the diyAudio Firstwatt F6 thread. You will need to purchase the JFETs separately (matched LSJ74/LSK170 quad).
This set of circuit boards will make a MOSFET version of the F6 amplifier of Nelson Pass. This amplifier is a new and interesting development from his creative mind, where a small collection of parts comes together to make amazing, beautiful music. This creativity and solid engineering has kept Mr. Pass and his companies Pass Labs and FirstWatt at the forefront of specialist audio engineering and construction, where new and wonderful creations are made.
The original amplifier utilized extremely rare power JFET from SemiSouth, which will never be made again, and are all gone. Be warned, any eBay sources claiming to have the SemiSouth devices are fakes. If you happen to already have the power JFET, they can be used with this PCB.
Populate these boards with your components, then add your own power supply, chassis and heat sinks to complete the amplifier.
The F6 is a Class-A MOSFET power amplifier, with a JFET driver stage. It utilizes a small-signal transformer for phase inversion, so both the output MOSFET are N-channel. This transformer greatly contributes to the overall sonic character of the amp which is very highly regarded and considered to be similar and having all the benefits and positive characteristics of a tube amp... making some observers speculate that much of the positive 'tube amp' sound is the transformers, not the tubes. The F6 is a regular kind of amp - a voltage source amplifier, requiring nothing out of the ordinary from the preamp or the speakers.
As with most of the FirstWatt amplifiers the power output is 25WPC into 8 ohm. More into 4 ohm.
A bipolar power supply of (+/- 24V) is required. This will require an 18V+18V (or 36V Center Tapped) transformer from 300-400VA, (shielded transformers are preferred) and PSU capacitance of at 60,000uF per rail or more. A PSU for the F4, F5, or similar will be appropriate. See the build guide for details.
Chassis (heatsink) requirements
The 4U 'Jack of all Chassis' is ideal for this amplifier. If making your own chassis a good rule of thumb is at least 25sq inch (160sq cm) of finned heatsink per output transistor. (More is always better.) The diyAudio "Universal Mounting Spec" (UMS) is a common mounting pattern between the amplifier PCB and the heatsinks. If you utilize the UMS on your heatsinks or use one of the pre-drilled chassis from diyAudio, you will be able to quickly and easily mount different amplifier boards in the same chassis. For example, a 4U 'Jack of all Chassis' with a 400VA, 18V+18V transformer and PSU board, will give you a power supply and chassis where you could try the F4, F5, F5C, Aleph J, and other Pass/FirsWatt amps in the future merely by swapping the amp PCB. The investment in Chassis and PSU needs only be made once.
An Illustrated build guide showing all sorts of useful information on how to build the F6 can be found here - Build Guide
Fast delivery, top quality parts. Sound amazing, very easy to build and adjustments. Thank you 6l6.
This is truly an excellent amp.
Very musical and dynamic.
This time around I will be trying some new interesting mods
Superb service, very well made pcb and first class components. I will start to build it next week. Thank you!
Fast delivery, high quality parts and PCB.
Not finish build yet, waiting for big heat sink and transformer.
I already had the F6 PCBs and had just finished it using some Triad transformers which apart from a massive overshoot (cured by a C across the feedback resistor) worked exceptionally well.
Buying the Jensen txs direct were quite expensive due to freight, duty and VAT costs. So when DIY shop had these back in I jumped at them.
Top quality PCBs, as usual, very fast delivery and good price, buy with confidence.
I have not started to build this amp yet, but I found it very convenient to have all the parts included. (Except for the input transistors, but I already have several matched sets of those that I bought a few years back.) So I can't comment on the amp, but I can comment on service from the DIY Audio Store: great job, folks! In this order as well as several previous orders.
4days to Vietnam. Thanks
I have purchased several items from the DIY store and it's all been top quality. A few masking errors on boards but they are always well explained in the forums and I know it's not the stores fault. I will be buying more...question is whats the next project?
We Also Recommend