Cart 0

Elekit TU-8200R 6L6GC Integrated Amplifier/HPA Kit

  • 79500


Discover the difference in listening pleasure with the flexibility of various power tubes and output modes.

This is the new "R" version of the 8200.  It has low ESR conductive polymer hybrid aluminum electrolytic capacitors used for the cathode bypass voltage amplification section. These low ESR electrolytic capacitors offer higher resolution and an improved sound quality.

Please note there is a small correction required to the manual. On page 3, section 1 covering resistors, the correct part for R70 is the 1/2W 0.47Ohm resistor. The correct part for R69 is the 12Ohm resistor.


      • Ships with JJ 6L6GC and JJ 12AU7/ECC82 power tubes, but also accepts KT88, KT90, KT66, EL34, etc
      • Organic cathode bypass capacitors
      • Film coupling capacitors
      • Circuit automatically adjusts bias for the optimal operation of each tube
      • 3 amplification modes can be selected using PCB jumpers:
        • Ultra linear (8W + 8W)
        • Triode (4W + 4W)
        • Pentode (8.2W + 8.2W)
      • FET ripple filter on board for power B for both left and right channels
      • Overcurrent protection
      • Power input: Universal R-core power transformer with 100/115/200/230V selectable during assembly
      • High quality PCB with 70um copper traces (double regular thickness)
      • Designed with beginners in mind - modular "plug and play" PCB design 
        • Audio Inputs:
          • Input 1: 2x RCA
          • Input 2: 2 x RCA / 3.5mm jack
        • Audio Outputs:
          • Rear
            • Left and right +/- gold plated screw type binding posts, banana plug compatible
            • Speaker impedance selector switch - 8-16Ω / 4-6.3Ω
          • Front
            • Headphone jack


        Tools required

        • Phillips screwdriver
        • Diagonal cutter
        • Longnose pliers
        • Scissors
        • Scotch tape
        • Hex wrench
        • Soldering iron


        • Stock tubes: 2 x 6L6GC, 2 x 12AU7
        • Rated output
          • 6L6GC (Ultra Linear): 8W + 8W (into 8Ω)
          • 6L6GC (Pentode): 8.2W + 8.2W
          • 6L6GC (Triode): 4W + 4W
        • Rated input: 6L6GC (UL connection): 340mV
        • Residual noise: 6L6GC (UL connection): 0.90mV (IEC)
        • Frequency response: 12Hz - 50kHz (-3dB)
        • Input terminals: 2 x Line-in, 3.5mm input jack
        • Input voltage: 100/110/200/230V AC via IEC inlet
        • Power consumption: 60W (using 6L6GC)
        • Dimensions: 252 x 158 x 285mm (including projections)
        • Weight: ~6.6kg assembled



        Customer Reviews

        No reviews yet

        We Also Recommend