Cart 0

F6 Parts Kit

  • 11900


After many years of being out of stock, we finally have the F6 transformer kits available.

There are two purchase options:

  1. PCB and Transformer: Pair of mirrored F6 PCBs and 2 Jensen JT-123-FLPCH signal transformers ($119)

  2. Parts Kit: All of the above plus everything you need to stuff the PCB except the JFETs ($169)

Parts kit contents:

  • Mirrored F6 PCBs (2)
  • Jensen JT-123-FLPCH transformers (2)
  • Q1/2 Matched IRFP240 MOSFETs (4)
  • R1 .56R 3W (2)
  • R2 .47R 3W (2)
  • R3 100R 3W (2)
  • R4 18R (2)
  • R5 1k (2)
  • R6 47k (2)
  • R7/8/9/10 10k (8)
  • R11/12 47R (4)
  • R13 15k (2)
  • C1/2 1000uf 25v (4)
  • P1/2 5k (4)
  • Z1/2 5.1v Zener (4) (Marked "31B")
  • Z1a/2a 6.0V Zener (4) (Marked "33B")
  • D1 LED (2)


Chassis Choice

The 4Ux300 Deluxe chassis is recommended for this amplifier. The 5Ux400 is overkill and the PCB placement of the transistors is non-ideal on the split heatsinks.

    About the amplifier

    These F-6 Clone Boards use the same circuit as the Nelson Pass / diyAudio FirstWatt F6 described in the diyAudio Firstwatt F6 thread. You will need to purchase the JFETs separately (matched LSJ74/LSK170 quad).

    This set of circuit boards will make a MOSFET version of the F6 amplifier of Nelson Pass. This amplifier is a new and interesting development from his creative mind, where a small collection of parts comes together to make amazing, beautiful music. This creativity and solid engineering has kept Mr. Pass and his companies Pass Labs and FirstWatt at the forefront of specialist audio engineering and construction, where new and wonderful creations are made.

    The original amplifier utilized extremely rare power JFET from SemiSouth, which will never be made again, and are all gone. Be warned, any eBay sources claiming to have the SemiSouth devices are fakes. If you happen to already have the power JFET, they can be used with this PCB.

    Populate these boards with your components, then add your own power supply, chassis and heat sinks to complete the amplifier.

    Circuit description

    The F6 is a Class-A MOSFET power amplifier, with a JFET driver stage. It utilizes a small-signal transformer for phase inversion, so both the output MOSFET are N-channel. This transformer greatly contributes to the overall sonic character of the amp which is very highly regarded and considered to be similar and having all the benefits and positive characteristics of a tube amp... making some observers speculate that much of the positive 'tube amp' sound is the transformers, not the tubes. The F6 is a regular kind of amp - a voltage source amplifier, requiring nothing out of the ordinary from the preamp or the speakers.

    Output power

    As with most of the FirstWatt amplifiers the power output is 25WPC into 8 ohm. More into 4 ohm.

    PSU requirements

    A bipolar power supply of (+/- 24V) is required. This will require an 18V+18V (or 36V Center Tapped) transformer from 300-400VA, (shielded transformers are preferred) and PSU capacitance of at 60,000uF per rail or more. A PSU for the F4, F5, or similar will be appropriate. See the build guide for details.

    Chassis (heatsink) requirements

    The 4U 'Jack of all Chassis' is ideal for this amplifier. If making your own chassis a good rule of thumb is at least 25sq inch (160sq cm) of finned heatsink per output transistor. (More is always better.) The diyAudio "Universal Mounting Spec" (UMS) is a common mounting pattern between the amplifier PCB and the heatsinks. If you utilize the UMS on your heatsinks or use one of the pre-drilled chassis from diyAudio, you will be able to quickly and easily mount different amplifier boards in the same chassis. For example, a 4U 'Jack of all Chassis' with a 400VA, 18V+18V transformer and PSU board, will give you a power supply and chassis where you could try the F4, F5, F5C, Aleph J, and other Pass/FirsWatt amps in the future merely by swapping the amp PCB. The investment in Chassis and PSU needs only be made once.

    Build Guide

    An Illustrated build guide showing all sorts of useful information on how to build the F6 can be found here -  Build Guide

    Customer Reviews

    Based on 15 reviews
    F6 amplifier kit

    Fast delivery, top quality parts. Sound amazing, very easy to build and adjustments. Thank you 6l6.

    F6 kit, JFETs, PSU V3.0.

    High quality pcb boards,
    fast sending to Croatia
    Thank you !!!

    F6 parts

    Very good quality components, fast delivery, I will start construction soon. I only miss the sense of setting P2 for a minimum BIAS at power on.

    This is my second set of F6 boards.

    This is truly an excellent amp.
    Very musical and dynamic.
    This time around I will be trying some new interesting mods


    my only complaint is that the kit does not come with isolators for the mosfets. I thought I had everything I needed exept the power supply parts.

    F6 amp kit

    Superb service, very well made pcb and first class components. I will start to build it next week. Thank you!

    F6 kit

    Fast delivery, high quality parts and PCB.
    Not finish build yet, waiting for big heat sink and transformer.

    F6 PCB/Transformer kit

    I already had the F6 PCBs and had just finished it using some Triad transformers which apart from a massive overshoot (cured by a C across the feedback resistor) worked exceptionally well.
    Buying the Jensen txs direct were quite expensive due to freight, duty and VAT costs. So when DIY shop had these back in I jumped at them.
    Top quality PCBs, as usual, very fast delivery and good price, buy with confidence.


    We Also Recommend