Menu
Cart 0

UMS 40mm Heatsinks

  • 6900



Description

Universal Mounting Specification (UMS) heatsinks, available for purchase individually.

4U 300mm (One side)

  • One "4U" 165 x 300mm x 40mm wave pattern finned heatsink (enough for one side of a chassis)
  • Purchase two sides if you would like enough to complete a whole chassis
  • Each 300mm heatsink has 23 holes drilled and tapped with M3 threads in the 4Ux300 UMS Hole Pattern
  • Re-anodized after tapping
  • Note: Photo shown shows heatsink prior to re-anodization
  • Save $48 compared to getting this work done yourself.  This level of heatsink customization would normally cost:
    • Heatsink: ~$32
    • Drilling and tapping: $50
    • Re-anodization: $25
    • Total: $117
    • Your discounted price: $69 (Save $48)

    5U 400mm (One side)

    • Two individual "5U" 210 x 200mm x 40mm wave pattern finned heatsinks.  These must be joined together with chassis rails (sold separately) to create one "side". When joined these two heatsinks form a 400mm deep heatsink (enough for one side of a chassis).
    • Purchase two sides if you would like enough to complete a whole chassis
    • Each "side" of 2x200mm heatsink has 26 holes drilled and tapped with M3 threads in the 5Ux400 UMS hole pattern
    • Anodized after tapping
    • Note: Photo shown shows heatsink prior to re-anodization. Photos shows a PCB which is not included.  Photo shows chassis rails which are not included.
    • Save $117 compared to getting this work done yourself.  This level of heatsink customization would normally cost:
      • Heatsinks: $66 (~$33 per individual heatsink)
      • Drilling and tapping: $100 ($50 per individual heatsink)
      • Re-anodization: $50 ($25 per individual heatsink)
      • Total: $216
      • Your discounted price: $99 (Save $117)

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    A.N.
    Fast shipping and top packaging

    The heatsinks was shipped to med very promptly after making the order. The shipping costs were low, as they were shipped from Italy to me in Norway, - within Europe. The arrived and I was impressed by the thorough packaging. The sinks themselves had some marks in their finish, on the inside face of them, mostly from a bit less than perfect anodizing-job. On the outside/fins (the most important part), they are perfectly black and no marks in the finish. Very nice to have pre-drilled/tapped sinks for my f4 project :) … Even buying from China (e-bay) and drilling/tapping my-selv, would have been more expensive. Great product!

    m
    m.k.
    UMS 40mm Heatsinks

    Holes drilled and tapped. What more could you ask for. Big beefy and perfect. Shipping astonishingly fast. Thanks


    We Also Recommend