Noir Pre & Headphone Amplifier

Noir is a unique low cost headphone amplifier project, comprised of three circuit boards. The entire Noir BOM is purchasable from Mouser in a single click. Two of the PCBs form pre-made front and rear panels so you can easily form an enclosure. Very cool!

Noir exploits the well known advantages of class-A operation and a minimalist all-discrete circuit design. The amplifier consists of only two transistors (each operated in single ended class-A) giving a very short and linear signal path.

There is a 1/4" headphone jack on the front panel, and preamp outputs (RCA jacks) on the rear panel. Gain is +6 dB. The volume control is an audiophile-quality ALPS Blue Velvet potentiometer.

For more information, to see completed builds or to participate in the community discussion, please visit the Noir diyAudio Discussion Thread. A detailed 37 page Noir Build Guide is now also available to walk you through the construction process.

The amplifier PCB is designed for ease of assembly. All components are thru-hole mounted and are spaced apart generously, making it a breeze to stuff and solder the board. Component IDs and component values are printed on the board, as a further aid to construction. It is an excellent choice for first-time builders. PCB size is 182mm x 112mm, gold traces, and premium 2oz copper thickness.

The amplifier PCB can be installed in a wide variety of chassis. It fits especially well in the Galaxy 1U 230x170mm chassis sold here in the store. In fact, the Noir PCB set includes a front panel and a back panel made of black PCB material (epoxy fiberglass) which fits the 1U Galaxy perfectly. These panels are pre-drilled and pre-labeled, so builders don't need to spend any time in the metal working shop, preparing the front panel or back panel. These panel PCBs don't serve any electrical purpose other than providing ground for the switches.

However should you eventually want to do so and have metal front/back panels, you'll have the original easy-to-work aluminum panels from the original chassis at hand. Noir is a project you can grow into.

You can purchase the PCBs by themselves for $29, or a bundle of the PCBs plus a US-stock chassis (which ships from the US, not Italy) for just $69. As mentioned, the chassis does include the original blank black aluminum front/back panels.

FEATURES

• All-discrete, solid state. No ICs, No vacuum tubes.
• Single ended, Class A circuit operating at 150 mA bias current (exceptionally high for a headphone amp)
• No mains voltage inside the DIY chassis. Power supply is a commercial, safety rated, DC wall wart followed by a 2 stage supply filter on the PCB
• Non-inverting circuit design. this is important because Left and Right headphones, unlike loudspeakers, share their (-) terminal. When a headphone amp has an inverting circuit, you can't undo the inversion by swapping (+) and (-) on each driver.

HOW DOES IT SOUND?

As the saying goes "the proof of the pudding is in the tasting". Here's some feedback from people who have built it, several of whom determined it is their favorite HPA of all time. Others remarked that it is an excellent choice for a beginner's DIY HPA project. 

BILL OF MATERIALS AND MOUSER SHOPPING CART

A spreadsheet Bill Of Materials is provided, and also a pre-loaded Shopping Cart at Mouser Electronics is presented. With a single click on the shopping cart, you can purchase all of the electronic components needed to build your Noir. You'll also need a 1U Galaxy chassis shipped from Italy or we have a few in the US at the moment which can be purchased as a bundle with the PCB from this page and will ship from the US.

NOTE: the ALPS potentiometer is frequently sold out at Mouser. Another source (cheaper too!) with lots of units in stock, is parts-express.com

• Power Supply Schematic (attached to first post)
• Noir Amplifier Schematic (attached to first post)
• Bill of Materials (attached to first post)
• Build Guide
• Discussion Thread